|Contact Us for Quotation
|Xtester-602 oil dielectric loss and electrical resistivity tester，According to GB/T5654-2007 "liquid insulating materials Relative permittivity, dielectric loss factor and dc resistivity measurements of design and manufacture. For the dielectric loss factor of liquids such as insulating oil dielectric and dc resistivity measurement. The integration of structure. Internal integration the dielectric loss of oil cup, temperature controller, temperature sensor, dielectric loss testing bridge, communication power supply, standard capacitor, high resistance meter, dc high voltage source and other major parts. Instrument internal adopts digital technology, all intelligent automation measurement, Equipped with large pure color 5.7 inch TFT LCD touch screen display, full Chinese menu, Test results can be automatic storage and print output, Operators will be able to operate and without professional training.
THE MAIN FUNCTIONS AND CHARACTERISTICS
（1）Oil cup of the accord with national standard GB/T5654-2007 three electrode type structure, the electrode spacing 2 mm, Can eliminate the stray capacitance and xie's influence on the dielectric loss test results.
（2）Instrument by medium frequency induction heating, PID temperature control algorithm. The heating mode with oil cup with non-contact heating body, heat evenly, high speed, convenient control, Make temperature strictly controlled within the preset temperature error range.
（3）Internal standard capacitor for SF6 inflatable three pole type capacitor, the capacitance of the dielectric loss and capacitance is not affected by environmental temperature, humidity, The instrument accuracy after long time use is still guaranteed.
|（4）Test AC power supply adopts AC - DC - AC conversion method, Effectively avoid the mains voltage and frequency fluctuations impact on dielectric loss test accuracy, Even if is a generator, the instrument can also run correctly.
|（5）Perfect protection function. When over voltage, over current, high voltage short circuit, Instrument can quickly cut off the high pressure, and send out a warning message.. When the temperature sensor failure or not connected, the warning information. In the medium frequency induction heating furnace with finite temperature relay, When the temperature over 120 degrees, the relay release, stop heating.
（6）Parameters setting is convenient. Temperature set range of 0 ~ 120 ℃,Ac voltage setting range200 ~ 2200 v,0 ~ 500 v dc voltage setting range.
（7）Adopted the pure color TFT LCD touch screen display, show clear. Simply set, the instrument can automatically test.And automatic storage and print the test results.
（8）Built-in real-time clock, the test date, time may be retained with the test results, display and print.
（9）Empty cup electrode calibration function. Measure the empty cup electrode capacitance and dielectric loss factor, cleaning and assembly of electrode to determine empty cup. Calibration data is automatically saved for relative permittivity and precise calculation of dc resistivity.
（10）Instrument RAM9 platform as the core, high precision, high speed.
THE MAIN TECHNICAL INDICATORS
The power supply voltage
The relative permittivity 1.000～30.000
Dielectric loss factor 0.00001～100
DC Resistivity: 2.5 MΩm~20 TΩm
Accuracy of measurement
The relative permittivity±1%reading
Dielectric loss factor±(1%reading+0.0001)
DC Resistivity: ±10% reading
Points and distinguishing rate
The relative permittivity 0.001
Dielectric loss factor 0.00001
Temperature measurement range
Temperature measurement error
The ac voltage
200～2200V Continuous adjustable, frequency 50 hz
Type or outside
|Total amount of
The environment temperature